Bidet 2000

Sanicare 1200 Hand Held Bidet – Model S1200C (Complete Set)

admin — Wed, 24 Nov 2010 07:30:54 +0000

Modern style hand held bidet. Longer handle. Available in Chrome ABS plastic spray head. Each hand bidet kit includes a hand bidet holder,chrome metal spiral hose, inline control valve, ceramic core on/off valve, and metal t-fitting with back flow preventer.


							
								Buy it Now


http://example.com/">My Caption

FREE Travel Bidet Included – $59.95 value!

**The Sanicare Travel Bidet / Portable Bidet is a MUST for people-on-the-go. This Unique Personal Hygiene System makes cleansing more convenient and effective beyond what toilet paper alone can achieve. It helps relieve the discomforts caused by hemorrhoids, infections, itching, etc. It is also a great accessory for mothers with young children and infants. The Sanicare Travel Bidet / Portable bidet allows everyone to be fresh and clean anytime, anywhere!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose

Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.

Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve

This fitting is designed for US toilets and has an exclusive screen filter not found on other cheap hand bidets. It’s easily removed for cleaning and helps to prevent your spray head nozzle from clogging up and leaking when in the off position. Also included is a backflow prevention valve to eliminate contamination of your water supply.

Brass/Chrome Ceramic Core on/off valve

The very best valves incorporate ceramic core seals for the best seal and long life. It’s important that you have a separate valve on your hand bidet SEPARATE from the fresh water source to the toilet. This is a MUST safety feature. Only quality Sanicare hand bidets offer this feature.

Hand Bidet Holder / Mounting Bracket

Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.

and FREE Inline Ceramic Core control valve valued at $19.95!

Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose
Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.
Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve
This fitting is designed for US toilets and has an exclusive screen filter not found on other cheap hand bidets. It’s easily removed for cleaning and helps to prevent your spray head nozzle from clogging up and leaking when in the off position. Also included is a backflow prevention valve to eliminate contamination of your water supply.
Brass/Chrome Ceramic Core on/off valve
The very best valves incorporate ceramic core seals for the best seal and long life. It’s important that you have a separate valve on your hand bidet SEPARATE from the fresh water source to the toilet. This is a MUST safety feature. Only quality Sanicare hand bidets offer this feature.
Hand Bidet Holder / Mounting Bracket
Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.
and FREE Inline Ceramic Core control valve valued at $19.95!
Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

Sanicare Hand Bidets Are Easy to Install:

You can Do It Yourself with just a few common tools:

	The Sanicare Hand Bidet you have ordered can be installed in a variety of convenient locations; either on the left or right side of your toilet. The only limitation is the length of the flexible hose. Although we have provided the most common plumbing fittings, should this unit not fit your toilet’s plumbing we suggest that you take your bidet to your local hardware store to find the correctly sized fitting/adapter.
Installation:
	1. Turn off the water valve at the base of the wall behind (near) the toilet as shown in Fig. 1-A 2. Flush your toilet to drain all of the water from the toilet tank. A small amount of water may remain in the tank, so you will want a small bowl and/or towel to catch it when you remove the hose in the next step. 3. Disconnect the hose at the underside of the tank as shown in Fig. 1-B
	4. Install The T-Connector fitting as shown in Fig.2 Connecting the T-fitting to the toilet and then the water supply hose to the bottom of the T-fitting. Use a piece of cloth or thin cardboard to protect the polished fitting from being scratched by the wrench.
	5. Attach the Ceramic Shut-Off/Flow Control Valve to the outlet branch of the T Connector as shown in Fig.3 Be sure that the rubber gasket (washer) is in place between the fittings. Tighten Well.
	6. Connect the flexible spiral metal bidet hose to the to the valve by placing the rubber gasket between the hose nut and the valve fitting. Tighten well. (See Fig. 4) 7. Direct the free end of the flexible hose into the toilet bowl and then open the valves to flush out the bidet hose to remove any residue before connecting to the in-line valve and hand bidet.
	8. (Optional) Attach the In-Line Control Valve to the free end of the bidet hose as shown in Fig.5. Be sure to insert a rubber gasket between the valve and the hose. Tighten well.
	9. Attach the Hand Bidet Spray to the In-line Valve as shown in Fig. 6 (or to the free end of the hose if you did not install the optional In-Line Valve). Be sure to insert a rubber gasket. Some Hand Bidet models may require a second rubber gasket to achieve a tight, leak-free connection. Test The Hand Bidet to ensure that there are no leaks
	10. Attach the Hand Bidet Holder/Wall Bracket to the wall at a convenient and comfortable location using the screws and wall anchors provided as shown in Fig.7. When mounting on a tile wall surface it is highly recommended that you drill the holes for the screws and wall anchors into the grout lines between the tiles to avoid damaging or cracking a tile.
Product Installation and Recommendations: The water pressure should be between 30 – 75 psi. This hand Bidet is a low-pressure device and for safety reasons not designed for connection to high-pressure outlets. Do not use toilet cleaners containing hydrochloric acid (HCL) to clean this bidet To avoid scratching the finish of your new bidet do not use abrasives such as a stiff brush, steel wool, or abrasive cleaners. Use a soft cloth to polish your Renaissance Hand Bidet to keep it looking bright and new. When not in use it is recommended that you turn the Ceramic Control Valve off to avoid any possible leakage. Should you experience any problems with your hand bidet it is recommended that you first disassemble and clean the unit before calling Technical Support at 1-800-878-4791 (option #3). Sanicare is always there to help you! Troubleshooting: Problem Checkpoint Solution -Cannot close water 1 Disassemble and clean -Water leaks around water 1 Disassemble and clean control plate -Water does not flow 1 Use a cleaning pin by piercing through smoothly the hose of the rinsing plate. -No or low water flow 1 Disassemble and clean

Sanicare 1100 Hand Held Bidet – Model S1100C (Complete Set

admin — Wed, 24 Nov 2010 07:28:06 +0000

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose

Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.

Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve

Brass/Chrome Ceramic Core on/off valve

Hand Bidet Holder / Mounting Bracket

Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.

and FREE Inline Ceramic Core control valve valued at $19.95!

Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose
Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.
Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve
This fitting is designed for US toilets and has an exclusive screen filter not found on other cheap hand bidets. It’s easily removed for cleaning and helps to prevent your spray head nozzle from clogging up and leaking when in the off position. Also included is a backflow prevention valve to eliminate contamination of your water supply.
Brass/Chrome Ceramic Core on/off valve
The very best valves incorporate ceramic core seals for the best seal and long life. It’s important that you have a separate valve on your hand bidet SEPARATE from the fresh water source to the toilet. This is a MUST safety feature. Only quality Sanicare hand bidets offer this feature.
Hand Bidet Holder / Mounting Bracket
Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.
and FREE Inline Ceramic Core control valve valued at $19.95!
Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

Sanicare Hand Bidets Are Easy to Install:

You can Do It Yourself with just a few common tools:

	The Sanicare Hand Bidet you have ordered can be installed in a variety of convenient locations; either on the left or right side of your toilet. The only limitation is the length of the flexible hose. Although we have provided the most common plumbing fittings, should this unit not fit your toilet’s plumbing we suggest that you take your bidet to your local hardware store to find the correctly sized fitting/adapter.
Installation:
	1. Turn off the water valve at the base of the wall behind (near) the toilet as shown in Fig. 1-A 2. Flush your toilet to drain all of the water from the toilet tank. A small amount of water may remain in the tank, so you will want a small bowl and/or towel to catch it when you remove the hose in the next step. 3. Disconnect the hose at the underside of the tank as shown in Fig. 1-B
	4. Install The T-Connector fitting as shown in Fig.2 Connecting the T-fitting to the toilet and then the water supply hose to the bottom of the T-fitting. Use a piece of cloth or thin cardboard to protect the polished fitting from being scratched by the wrench.
	5. Attach the Ceramic Shut-Off/Flow Control Valve to the outlet branch of the T Connector as shown in Fig.3 Be sure that the rubber gasket (washer) is in place between the fittings. Tighten Well.
	6. Connect the flexible spiral metal bidet hose to the to the valve by placing the rubber gasket between the hose nut and the valve fitting. Tighten well. (See Fig. 4) 7. Direct the free end of the flexible hose into the toilet bowl and then open the valves to flush out the bidet hose to remove any residue before connecting to the in-line valve and hand bidet.
	8. (Optional) Attach the In-Line Control Valve to the free end of the bidet hose as shown in Fig.5. Be sure to insert a rubber gasket between the valve and the hose. Tighten well.
	9. Attach the Hand Bidet Spray to the In-line Valve as shown in Fig. 6 (or to the free end of the hose if you did not install the optional In-Line Valve). Be sure to insert a rubber gasket. Some Hand Bidet models may require a second rubber gasket to achieve a tight, leak-free connection. Test The Hand Bidet to ensure that there are no leaks
	10. Attach the Hand Bidet Holder/Wall Bracket to the wall at a convenient and comfortable location using the screws and wall anchors provided as shown in Fig.7. When mounting on a tile wall surface it is highly recommended that you drill the holes for the screws and wall anchors into the grout lines between the tiles to avoid damaging or cracking a tile.
Product Installation and Recommendations: The water pressure should be between 30 – 75 psi. This hand Bidet is a low-pressure device and for safety reasons not designed for connection to high-pressure outlets. Do not use toilet cleaners containing hydrochloric acid (HCL) to clean this bidet To avoid scratching the finish of your new bidet do not use abrasives such as a stiff brush, steel wool, or abrasive cleaners. Use a soft cloth to polish your Renaissance Hand Bidet to keep it looking bright and new. When not in use it is recommended that you turn the Ceramic Control Valve off to avoid any possible leakage. Should you experience any problems with your hand bidet it is recommended that you first disassemble and clean the unit before calling Technical Support at 1-800-878-4791 (option #3). Sanicare is always there to help you! Troubleshooting: Problem Checkpoint Solution -Cannot close water 1 Disassemble and clean -Water leaks around water 1 Disassemble and clean control plate -Water does not flow 1 Use a cleaning pin by piercing through smoothly the hose of the rinsing plate. -No or low water flow 1 Disassemble and clean

Sanicare 900 Hand Held Bidet – Model S900CW (Complete Set)

admin — Wed, 24 Nov 2010 07:24:32 +0000

Modern style hand held bidet. Available in White ABS plastic spray head. Each hand bidet kit includes a hand bidet holder,chrome metal spiral hose, inline control valve, ceramic core on/off valve, and metal t-fitting with back flow preventer.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose

Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.

Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve

Brass/Chrome Ceramic Core on/off valve

Hand Bidet Holder / Mounting Bracket

Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.

and FREE Inline Ceramic Core control valve valued at $19.95!

Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose
Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.
Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve
This fitting is designed for US toilets and has an exclusive screen filter not found on other cheap hand bidets. It’s easily removed for cleaning and helps to prevent your spray head nozzle from clogging up and leaking when in the off position. Also included is a backflow prevention valve to eliminate contamination of your water supply.
Brass/Chrome Ceramic Core on/off valve
The very best valves incorporate ceramic core seals for the best seal and long life. It’s important that you have a separate valve on your hand bidet SEPARATE from the fresh water source to the toilet. This is a MUST safety feature. Only quality Sanicare hand bidets offer this feature.
Hand Bidet Holder / Mounting Bracket
Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.
and FREE Inline Ceramic Core control valve valued at $19.95!
Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

Sanicare Hand Bidets Are Easy to Install:

You can Do It Yourself with just a few common tools:

	The Sanicare Hand Bidet you have ordered can be installed in a variety of convenient locations; either on the left or right side of your toilet. The only limitation is the length of the flexible hose. Although we have provided the most common plumbing fittings, should this unit not fit your toilet’s plumbing we suggest that you take your bidet to your local hardware store to find the correctly sized fitting/adapter.
Installation:
	1. Turn off the water valve at the base of the wall behind (near) the toilet as shown in Fig. 1-A 2. Flush your toilet to drain all of the water from the toilet tank. A small amount of water may remain in the tank, so you will want a small bowl and/or towel to catch it when you remove the hose in the next step. 3. Disconnect the hose at the underside of the tank as shown in Fig. 1-B
	4. Install The T-Connector fitting as shown in Fig.2 Connecting the T-fitting to the toilet and then the water supply hose to the bottom of the T-fitting. Use a piece of cloth or thin cardboard to protect the polished fitting from being scratched by the wrench.
	5. Attach the Ceramic Shut-Off/Flow Control Valve to the outlet branch of the T Connector as shown in Fig.3 Be sure that the rubber gasket (washer) is in place between the fittings. Tighten Well.
	6. Connect the flexible spiral metal bidet hose to the to the valve by placing the rubber gasket between the hose nut and the valve fitting. Tighten well. (See Fig. 4) 7. Direct the free end of the flexible hose into the toilet bowl and then open the valves to flush out the bidet hose to remove any residue before connecting to the in-line valve and hand bidet.
	8. (Optional) Attach the In-Line Control Valve to the free end of the bidet hose as shown in Fig.5. Be sure to insert a rubber gasket between the valve and the hose. Tighten well.
	9. Attach the Hand Bidet Spray to the In-line Valve as shown in Fig. 6 (or to the free end of the hose if you did not install the optional In-Line Valve). Be sure to insert a rubber gasket. Some Hand Bidet models may require a second rubber gasket to achieve a tight, leak-free connection. Test The Hand Bidet to ensure that there are no leaks
	10. Attach the Hand Bidet Holder/Wall Bracket to the wall at a convenient and comfortable location using the screws and wall anchors provided as shown in Fig.7. When mounting on a tile wall surface it is highly recommended that you drill the holes for the screws and wall anchors into the grout lines between the tiles to avoid damaging or cracking a tile.
Product Installation and Recommendations: The water pressure should be between 30 – 75 psi. This hand Bidet is a low-pressure device and for safety reasons not designed for connection to high-pressure outlets. Do not use toilet cleaners containing hydrochloric acid (HCL) to clean this bidet To avoid scratching the finish of your new bidet do not use abrasives such as a stiff brush, steel wool, or abrasive cleaners. Use a soft cloth to polish your Renaissance Hand Bidet to keep it looking bright and new. When not in use it is recommended that you turn the Ceramic Control Valve off to avoid any possible leakage. Should you experience any problems with your hand bidet it is recommended that you first disassemble and clean the unit before calling Technical Support at 1-800-878-4791 (option #3). Sanicare is always there to help you! Troubleshooting: Problem Checkpoint Solution -Cannot close water 1 Disassemble and clean -Water leaks around water 1 Disassemble and clean control plate -Water does not flow 1 Use a cleaning pin by piercing through smoothly the hose of the rinsing plate. -No or low water flow 1 Disassemble and clean

Sanicare 900 Hand Held Bidet – Model S900C (Complete Set)

admin — Wed, 24 Nov 2010 07:20:20 +0000

Modern style hand held bidet. Available in Chrome ABS plastic spray head. Each hand bidet kit includes a hand bidet holder,chrome metal spiral hose, inline control valve, ceramic core on/off valve, and metal t-fitting with back flow preventer.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose

Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.

Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve

Brass/Chrome Ceramic Core on/off valve

Hand Bidet Holder / Mounting Bracket

Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.

and FREE Inline Ceramic Core control valve valued at $19.95!

Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose
Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.
Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve
This fitting is designed for US toilets and has an exclusive screen filter not found on other cheap hand bidets. It’s easily removed for cleaning and helps to prevent your spray head nozzle from clogging up and leaking when in the off position. Also included is a backflow prevention valve to eliminate contamination of your water supply.
Brass/Chrome Ceramic Core on/off valve
The very best valves incorporate ceramic core seals for the best seal and long life. It’s important that you have a separate valve on your hand bidet SEPARATE from the fresh water source to the toilet. This is a MUST safety feature. Only quality Sanicare hand bidets offer this feature.
Hand Bidet Holder / Mounting Bracket
Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.
and FREE Inline Ceramic Core control valve valued at $19.95!
Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

Sanicare Hand Bidets Are Easy to Install:

You can Do It Yourself with just a few common tools:

	The Sanicare Hand Bidet you have ordered can be installed in a variety of convenient locations; either on the left or right side of your toilet. The only limitation is the length of the flexible hose. Although we have provided the most common plumbing fittings, should this unit not fit your toilet’s plumbing we suggest that you take your bidet to your local hardware store to find the correctly sized fitting/adapter.
Installation:
	1. Turn off the water valve at the base of the wall behind (near) the toilet as shown in Fig. 1-A 2. Flush your toilet to drain all of the water from the toilet tank. A small amount of water may remain in the tank, so you will want a small bowl and/or towel to catch it when you remove the hose in the next step. 3. Disconnect the hose at the underside of the tank as shown in Fig. 1-B
	4. Install The T-Connector fitting as shown in Fig.2 Connecting the T-fitting to the toilet and then the water supply hose to the bottom of the T-fitting. Use a piece of cloth or thin cardboard to protect the polished fitting from being scratched by the wrench.
	5. Attach the Ceramic Shut-Off/Flow Control Valve to the outlet branch of the T Connector as shown in Fig.3 Be sure that the rubber gasket (washer) is in place between the fittings. Tighten Well.
	6. Connect the flexible spiral metal bidet hose to the to the valve by placing the rubber gasket between the hose nut and the valve fitting. Tighten well. (See Fig. 4) 7. Direct the free end of the flexible hose into the toilet bowl and then open the valves to flush out the bidet hose to remove any residue before connecting to the in-line valve and hand bidet.
	8. (Optional) Attach the In-Line Control Valve to the free end of the bidet hose as shown in Fig.5. Be sure to insert a rubber gasket between the valve and the hose. Tighten well.
	9. Attach the Hand Bidet Spray to the In-line Valve as shown in Fig. 6 (or to the free end of the hose if you did not install the optional In-Line Valve). Be sure to insert a rubber gasket. Some Hand Bidet models may require a second rubber gasket to achieve a tight, leak-free connection. Test The Hand Bidet to ensure that there are no leaks
	10. Attach the Hand Bidet Holder/Wall Bracket to the wall at a convenient and comfortable location using the screws and wall anchors provided as shown in Fig.7. When mounting on a tile wall surface it is highly recommended that you drill the holes for the screws and wall anchors into the grout lines between the tiles to avoid damaging or cracking a tile.
Product Installation and Recommendations: The water pressure should be between 30 – 75 psi. This hand Bidet is a low-pressure device and for safety reasons not designed for connection to high-pressure outlets. Do not use toilet cleaners containing hydrochloric acid (HCL) to clean this bidet To avoid scratching the finish of your new bidet do not use abrasives such as a stiff brush, steel wool, or abrasive cleaners. Use a soft cloth to polish your Renaissance Hand Bidet to keep it looking bright and new. When not in use it is recommended that you turn the Ceramic Control Valve off to avoid any possible leakage. Should you experience any problems with your hand bidet it is recommended that you first disassemble and clean the unit before calling Technical Support at 1-800-878-4791 (option #3). Sanicare is always there to help you! Troubleshooting: Problem Checkpoint Solution -Cannot close water 1 Disassemble and clean -Water leaks around water 1 Disassemble and clean control plate -Water does not flow 1 Use a cleaning pin by piercing through smoothly the hose of the rinsing plate. -No or low water flow 1 Disassemble and clean

Sanicare 801 Hand Held Bidet – Model S801 (Complete Set)

admin — Wed, 24 Nov 2010 07:15:52 +0000

Easy to hold with wide handle for ease of use. ABS plastic. Available in chrome, satin, and white. Each hand bidet kit includes a hand bidet holder,chrome metal spiral hose, inline control valve, ceramic core on/off valve, and metal t-fitting with back flow preventer.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose

Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.

Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve

Brass/Chrome Ceramic Core on/off valve

Hand Bidet Holder / Mounting Bracket

Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.

and FREE Inline Ceramic Core control valve valued at $19.95!

Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

Sanicare Hand Bidets Are Easy to Install:

You can Do It Yourself with just a few common tools:

	The Sanicare Hand Bidet you have ordered can be installed in a variety of convenient locations; either on the left or right side of your toilet. The only limitation is the length of the flexible hose. Although we have provided the most common plumbing fittings, should this unit not fit your toilet’s plumbing we suggest that you take your bidet to your local hardware store to find the correctly sized fitting/adapter.
Installation:
	1. Turn off the water valve at the base of the wall behind (near) the toilet as shown in Fig. 1-A 2. Flush your toilet to drain all of the water from the toilet tank. A small amount of water may remain in the tank, so you will want a small bowl and/or towel to catch it when you remove the hose in the next step. 3. Disconnect the hose at the underside of the tank as shown in Fig. 1-B
	4. Install The T-Connector fitting as shown in Fig.2 Connecting the T-fitting to the toilet and then the water supply hose to the bottom of the T-fitting. Use a piece of cloth or thin cardboard to protect the polished fitting from being scratched by the wrench.
	5. Attach the Ceramic Shut-Off/Flow Control Valve to the outlet branch of the T Connector as shown in Fig.3 Be sure that the rubber gasket (washer) is in place between the fittings. Tighten Well.
	6. Connect the flexible spiral metal bidet hose to the to the valve by placing the rubber gasket between the hose nut and the valve fitting. Tighten well. (See Fig. 4) 7. Direct the free end of the flexible hose into the toilet bowl and then open the valves to flush out the bidet hose to remove any residue before connecting to the in-line valve and hand bidet.
	8. (Optional) Attach the In-Line Control Valve to the free end of the bidet hose as shown in Fig.5. Be sure to insert a rubber gasket between the valve and the hose. Tighten well.
	9. Attach the Hand Bidet Spray to the In-line Valve as shown in Fig. 6 (or to the free end of the hose if you did not install the optional In-Line Valve). Be sure to insert a rubber gasket. Some Hand Bidet models may require a second rubber gasket to achieve a tight, leak-free connection. Test The Hand Bidet to ensure that there are no leaks
	10. Attach the Hand Bidet Holder/Wall Bracket to the wall at a convenient and comfortable location using the screws and wall anchors provided as shown in Fig.7. When mounting on a tile wall surface it is highly recommended that you drill the holes for the screws and wall anchors into the grout lines between the tiles to avoid damaging or cracking a tile.
Product Installation and Recommendations: The water pressure should be between 30 – 75 psi. This hand Bidet is a low-pressure device and for safety reasons not designed for connection to high-pressure outlets. Do not use toilet cleaners containing hydrochloric acid (HCL) to clean this bidet To avoid scratching the finish of your new bidet do not use abrasives such as a stiff brush, steel wool, or abrasive cleaners. Use a soft cloth to polish your Renaissance Hand Bidet to keep it looking bright and new. When not in use it is recommended that you turn the Ceramic Control Valve off to avoid any possible leakage. Should you experience any problems with your hand bidet it is recommended that you first disassemble and clean the unit before calling Technical Support at 1-800-878-4791 (option #3). Sanicare is always there to help you! Troubleshooting: Problem Checkpoint Solution -Cannot close water 1 Disassemble and clean -Water leaks around water 1 Disassemble and clean control plate -Water does not flow 1 Use a cleaning pin by piercing through smoothly the hose of the rinsing plate. -No or low water flow 1 Disassemble and clean

Sanicare 800 Hand Held Bidet Gold – Model S800G (Complete Set)

admin — Wed, 24 Nov 2010 07:11:39 +0000

Curved design with full length spray button. Gold ABS plastic. Each hand bidet kit includes a hand bidet holder, gold metal spiral hose, inline control valve, ceramic core on/off valve, and metal t-fitting with back flow preventer.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose

Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.

Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve

Brass/Chrome Ceramic Core on/off valve

Hand Bidet Holder / Mounting Bracket

Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.

and FREE Inline Ceramic Core control valve valued at $19.95!

Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose
Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.
Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve
This fitting is designed for US toilets and has an exclusive screen filter not found on other cheap hand bidets. It’s easily removed for cleaning and helps to prevent your spray head nozzle from clogging up and leaking when in the off position. Also included is a backflow prevention valve to eliminate contamination of your water supply.
Brass/Chrome Ceramic Core on/off valve
The very best valves incorporate ceramic core seals for the best seal and long life. It’s important that you have a separate valve on your hand bidet SEPARATE from the fresh water source to the toilet. This is a MUST safety feature. Only quality Sanicare hand bidets offer this feature.
Hand Bidet Holder / Mounting Bracket
Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.
and FREE Inline Ceramic Core control valve valued at $19.95!
Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

CONVERT YOUR HAND BIDET TO HOT AND COLD WATER

Faucet Adapter Kit

Click Here

Thermostatic Mixing Valve

Click Here

Bidet Mixing Valve

Click Here

Electric Water Heater

Click Here

Sanicare Hand Bidets Are Easy to Install:

You can Do It Yourself with just a few common tools:

	The Sanicare Hand Bidet you have ordered can be installed in a variety of convenient locations; either on the left or right side of your toilet. The only limitation is the length of the flexible hose. Although we have provided the most common plumbing fittings, should this unit not fit your toilet’s plumbing we suggest that you take your bidet to your local hardware store to find the correctly sized fitting/adapter.
Installation:
	1. Turn off the water valve at the base of the wall behind (near) the toilet as shown in Fig. 1-A 2. Flush your toilet to drain all of the water from the toilet tank. A small amount of water may remain in the tank, so you will want a small bowl and/or towel to catch it when you remove the hose in the next step. 3. Disconnect the hose at the underside of the tank as shown in Fig. 1-B
	4. Install The T-Connector fitting as shown in Fig.2 Connecting the T-fitting to the toilet and then the water supply hose to the bottom of the T-fitting. Use a piece of cloth or thin cardboard to protect the polished fitting from being scratched by the wrench.
	5. Attach the Ceramic Shut-Off/Flow Control Valve to the outlet branch of the T Connector as shown in Fig.3 Be sure that the rubber gasket (washer) is in place between the fittings. Tighten Well.
	6. Connect the flexible spiral metal bidet hose to the to the valve by placing the rubber gasket between the hose nut and the valve fitting. Tighten well. (See Fig. 4) 7. Direct the free end of the flexible hose into the toilet bowl and then open the valves to flush out the bidet hose to remove any residue before connecting to the in-line valve and hand bidet.
	8. (Optional) Attach the In-Line Control Valve to the free end of the bidet hose as shown in Fig.5. Be sure to insert a rubber gasket between the valve and the hose. Tighten well.
	9. Attach the Hand Bidet Spray to the In-line Valve as shown in Fig. 6 (or to the free end of the hose if you did not install the optional In-Line Valve). Be sure to insert a rubber gasket. Some Hand Bidet models may require a second rubber gasket to achieve a tight, leak-free connection. Test The Hand Bidet to ensure that there are no leaks
	10. Attach the Hand Bidet Holder/Wall Bracket to the wall at a convenient and comfortable location using the screws and wall anchors provided as shown in Fig.7. When mounting on a tile wall surface it is highly recommended that you drill the holes for the screws and wall anchors into the grout lines between the tiles to avoid damaging or cracking a tile.
Product Installation and Recommendations: The water pressure should be between 30 – 75 psi. This hand Bidet is a low-pressure device and for safety reasons not designed for connection to high-pressure outlets. Do not use toilet cleaners containing hydrochloric acid (HCL) to clean this bidet To avoid scratching the finish of your new bidet do not use abrasives such as a stiff brush, steel wool, or abrasive cleaners. Use a soft cloth to polish your Renaissance Hand Bidet to keep it looking bright and new. When not in use it is recommended that you turn the Ceramic Control Valve off to avoid any possible leakage. Should you experience any problems with your hand bidet it is recommended that you first disassemble and clean the unit before calling Technical Support at 1-800-878-4791 (option #3). Sanicare is always there to help you! Troubleshooting: Problem Checkpoint Solution -Cannot close water 1 Disassemble and clean -Water leaks around water 1 Disassemble and clean control plate -Water does not flow 1 Use a cleaning pin by piercing through smoothly the hose of the rinsing plate. -No or low water flow 1 Disassemble and clean

Sanicare 800 Hand Held Bidet Chrome – Model S800 (Complete Set)

admin — Wed, 24 Nov 2010 07:09:24 +0000

Curved design with full length spray button. ABS plastic. Each hand bidet kit includes a hand bidet holder,chrome metal spiral hose, inline control valve, ceramic core on/off valve, and metal t-fitting with back flow preventer.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose

Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.

Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve

Brass/Chrome Ceramic Core on/off valve

Hand Bidet Holder / Mounting Bracket

Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.

and FREE Inline Ceramic Core control valve valued at $19.95!

Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

Sanicare Hand Bidets Are Easy to Install:

You can Do It Yourself with just a few common tools:

	The Sanicare Hand Bidet you have ordered can be installed in a variety of convenient locations; either on the left or right side of your toilet. The only limitation is the length of the flexible hose. Although we have provided the most common plumbing fittings, should this unit not fit your toilet’s plumbing we suggest that you take your bidet to your local hardware store to find the correctly sized fitting/adapter.
Installation:
	1. Turn off the water valve at the base of the wall behind (near) the toilet as shown in Fig. 1-A 2. Flush your toilet to drain all of the water from the toilet tank. A small amount of water may remain in the tank, so you will want a small bowl and/or towel to catch it when you remove the hose in the next step. 3. Disconnect the hose at the underside of the tank as shown in Fig. 1-B
	4. Install The T-Connector fitting as shown in Fig.2 Connecting the T-fitting to the toilet and then the water supply hose to the bottom of the T-fitting. Use a piece of cloth or thin cardboard to protect the polished fitting from being scratched by the wrench.
	5. Attach the Ceramic Shut-Off/Flow Control Valve to the outlet branch of the T Connector as shown in Fig.3 Be sure that the rubber gasket (washer) is in place between the fittings. Tighten Well.
	6. Connect the flexible spiral metal bidet hose to the to the valve by placing the rubber gasket between the hose nut and the valve fitting. Tighten well. (See Fig. 4) 7. Direct the free end of the flexible hose into the toilet bowl and then open the valves to flush out the bidet hose to remove any residue before connecting to the in-line valve and hand bidet.
	8. (Optional) Attach the In-Line Control Valve to the free end of the bidet hose as shown in Fig.5. Be sure to insert a rubber gasket between the valve and the hose. Tighten well.
	9. Attach the Hand Bidet Spray to the In-line Valve as shown in Fig. 6 (or to the free end of the hose if you did not install the optional In-Line Valve). Be sure to insert a rubber gasket. Some Hand Bidet models may require a second rubber gasket to achieve a tight, leak-free connection. Test The Hand Bidet to ensure that there are no leaks
	10. Attach the Hand Bidet Holder/Wall Bracket to the wall at a convenient and comfortable location using the screws and wall anchors provided as shown in Fig.7. When mounting on a tile wall surface it is highly recommended that you drill the holes for the screws and wall anchors into the grout lines between the tiles to avoid damaging or cracking a tile.
Product Installation and Recommendations: The water pressure should be between 30 – 75 psi. This hand Bidet is a low-pressure device and for safety reasons not designed for connection to high-pressure outlets. Do not use toilet cleaners containing hydrochloric acid (HCL) to clean this bidet To avoid scratching the finish of your new bidet do not use abrasives such as a stiff brush, steel wool, or abrasive cleaners. Use a soft cloth to polish your Renaissance Hand Bidet to keep it looking bright and new. When not in use it is recommended that you turn the Ceramic Control Valve off to avoid any possible leakage. Should you experience any problems with your hand bidet it is recommended that you first disassemble and clean the unit before calling Technical Support at 1-800-878-4791 (option #3). Sanicare is always there to help you! Troubleshooting: Problem Checkpoint Solution -Cannot close water 1 Disassemble and clean -Water leaks around water 1 Disassemble and clean control plate -Water does not flow 1 Use a cleaning pin by piercing through smoothly the hose of the rinsing plate. -No or low water flow 1 Disassemble and clean

Sanicare 500 Hand Held Bidet Chrome – Model S500 (Complete Set)

admin — Wed, 24 Nov 2010 06:57:58 +0000

Compact design with full length spray button. Chrome ABS plastic. Each hand bidet kit includes a hand bidet holder,chrome metal spiral hose, inline control valve, ceramic core on/off valve, and metal t-fitting with back flow preventer.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose

Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.

Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve

Brass/Chrome Ceramic Core on/off valve

Hand Bidet Holder / Mounting Bracket

Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.

and FREE Inline Ceramic Core control valve valued at $19.95!

Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose
Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.
Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve
This fitting is designed for US toilets and has an exclusive screen filter not found on other cheap hand bidets. It’s easily removed for cleaning and helps to prevent your spray head nozzle from clogging up and leaking when in the off position. Also included is a backflow prevention valve to eliminate contamination of your water supply.
Brass/Chrome Ceramic Core on/off valve
The very best valves incorporate ceramic core seals for the best seal and long life. It’s important that you have a separate valve on your hand bidet SEPARATE from the fresh water source to the toilet. This is a MUST safety feature. Only quality Sanicare hand bidets offer this feature.
Hand Bidet Holder / Mounting Bracket
Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.
and FREE Inline Ceramic Core control valve valued at $19.95!
Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

Sanicare Hand Bidets Are Easy to Install:

You can Do It Yourself with just a few common tools:

	The Sanicare Hand Bidet you have ordered can be installed in a variety of convenient locations; either on the left or right side of your toilet. The only limitation is the length of the flexible hose. Although we have provided the most common plumbing fittings, should this unit not fit your toilet’s plumbing we suggest that you take your bidet to your local hardware store to find the correctly sized fitting/adapter.
Installation:
	1. Turn off the water valve at the base of the wall behind (near) the toilet as shown in Fig. 1-A 2. Flush your toilet to drain all of the water from the toilet tank. A small amount of water may remain in the tank, so you will want a small bowl and/or towel to catch it when you remove the hose in the next step. 3. Disconnect the hose at the underside of the tank as shown in Fig. 1-B
	4. Install The T-Connector fitting as shown in Fig.2 Connecting the T-fitting to the toilet and then the water supply hose to the bottom of the T-fitting. Use a piece of cloth or thin cardboard to protect the polished fitting from being scratched by the wrench.
	5. Attach the Ceramic Shut-Off/Flow Control Valve to the outlet branch of the T Connector as shown in Fig.3 Be sure that the rubber gasket (washer) is in place between the fittings. Tighten Well.
	6. Connect the flexible spiral metal bidet hose to the to the valve by placing the rubber gasket between the hose nut and the valve fitting. Tighten well. (See Fig. 4) 7. Direct the free end of the flexible hose into the toilet bowl and then open the valves to flush out the bidet hose to remove any residue before connecting to the in-line valve and hand bidet.
	8. (Optional) Attach the In-Line Control Valve to the free end of the bidet hose as shown in Fig.5. Be sure to insert a rubber gasket between the valve and the hose. Tighten well.
	9. Attach the Hand Bidet Spray to the In-line Valve as shown in Fig. 6 (or to the free end of the hose if you did not install the optional In-Line Valve). Be sure to insert a rubber gasket. Some Hand Bidet models may require a second rubber gasket to achieve a tight, leak-free connection. Test The Hand Bidet to ensure that there are no leaks
	10. Attach the Hand Bidet Holder/Wall Bracket to the wall at a convenient and comfortable location using the screws and wall anchors provided as shown in Fig.7. When mounting on a tile wall surface it is highly recommended that you drill the holes for the screws and wall anchors into the grout lines between the tiles to avoid damaging or cracking a tile.
Product Installation and Recommendations: The water pressure should be between 30 – 75 psi. This hand Bidet is a low-pressure device and for safety reasons not designed for connection to high-pressure outlets. Do not use toilet cleaners containing hydrochloric acid (HCL) to clean this bidet To avoid scratching the finish of your new bidet do not use abrasives such as a stiff brush, steel wool, or abrasive cleaners. Use a soft cloth to polish your Renaissance Hand Bidet to keep it looking bright and new. When not in use it is recommended that you turn the Ceramic Control Valve off to avoid any possible leakage. Should you experience any problems with your hand bidet it is recommended that you first disassemble and clean the unit before calling Technical Support at 1-800-878-4791 (option #3). Sanicare is always there to help you! Troubleshooting: Problem Checkpoint Solution -Cannot close water 1 Disassemble and clean -Water leaks around water 1 Disassemble and clean control plate -Water does not flow 1 Use a cleaning pin by piercing through smoothly the hose of the rinsing plate. -No or low water flow 1 Disassemble and clean

Sanicare 400 Hand Held Bidet Chrome – Model S400 (Complete Set)

admin — Wed, 24 Nov 2010 06:53:39 +0000

Compact design with full length spray button. Chrome ABS plastic. Installation kit includes: chrome metal spiral hose, hand bidet holder, T adapter valve with built-in filter and back flow prevention valve, ceramic core on/off valve, and inline ceramic core control valve, and instruction manual.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose

Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.

Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve

Brass/Chrome Ceramic Core on/off valve

Hand Bidet Holder / Mounting Bracket

Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.

and FREE Inline Ceramic Core control valve valued at $19.95!

Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

Sanicare Hand Bidets Are Easy to Install:

You can Do It Yourself with just a few common tools:

	The Sanicare Hand Bidet you have ordered can be installed in a variety of convenient locations; either on the left or right side of your toilet. The only limitation is the length of the flexible hose. Although we have provided the most common plumbing fittings, should this unit not fit your toilet’s plumbing we suggest that you take your bidet to your local hardware store to find the correctly sized fitting/adapter.
Installation:
	1. Turn off the water valve at the base of the wall behind (near) the toilet as shown in Fig. 1-A 2. Flush your toilet to drain all of the water from the toilet tank. A small amount of water may remain in the tank, so you will want a small bowl and/or towel to catch it when you remove the hose in the next step. 3. Disconnect the hose at the underside of the tank as shown in Fig. 1-B
	4. Install The T-Connector fitting as shown in Fig.2 Connecting the T-fitting to the toilet and then the water supply hose to the bottom of the T-fitting. Use a piece of cloth or thin cardboard to protect the polished fitting from being scratched by the wrench.
	5. Attach the Ceramic Shut-Off/Flow Control Valve to the outlet branch of the T Connector as shown in Fig.3 Be sure that the rubber gasket (washer) is in place between the fittings. Tighten Well.
	6. Connect the flexible spiral metal bidet hose to the to the valve by placing the rubber gasket between the hose nut and the valve fitting. Tighten well. (See Fig. 4) 7. Direct the free end of the flexible hose into the toilet bowl and then open the valves to flush out the bidet hose to remove any residue before connecting to the in-line valve and hand bidet.
	8. (Optional) Attach the In-Line Control Valve to the free end of the bidet hose as shown in Fig.5. Be sure to insert a rubber gasket between the valve and the hose. Tighten well.
	9. Attach the Hand Bidet Spray to the In-line Valve as shown in Fig. 6 (or to the free end of the hose if you did not install the optional In-Line Valve). Be sure to insert a rubber gasket. Some Hand Bidet models may require a second rubber gasket to achieve a tight, leak-free connection. Test The Hand Bidet to ensure that there are no leaks
	10. Attach the Hand Bidet Holder/Wall Bracket to the wall at a convenient and comfortable location using the screws and wall anchors provided as shown in Fig.7. When mounting on a tile wall surface it is highly recommended that you drill the holes for the screws and wall anchors into the grout lines between the tiles to avoid damaging or cracking a tile.
Product Installation and Recommendations: The water pressure should be between 30 – 75 psi. This hand Bidet is a low-pressure device and for safety reasons not designed for connection to high-pressure outlets. Do not use toilet cleaners containing hydrochloric acid (HCL) to clean this bidet To avoid scratching the finish of your new bidet do not use abrasives such as a stiff brush, steel wool, or abrasive cleaners. Use a soft cloth to polish your Renaissance Hand Bidet to keep it looking bright and new. When not in use it is recommended that you turn the Ceramic Control Valve off to avoid any possible leakage. Should you experience any problems with your hand bidet it is recommended that you first disassemble and clean the unit before calling Technical Support at 1-800-878-4791 (option #3). Sanicare is always there to help you! Troubleshooting: Problem Checkpoint Solution -Cannot close water 1 Disassemble and clean -Water leaks around water 1 Disassemble and clean control plate -Water does not flow 1 Use a cleaning pin by piercing through smoothly the hose of the rinsing plate. -No or low water flow 1 Disassemble and clean

Sanicare 301 Hand Held Bidet White – Model S301 (Complete Set)

admin — Wed, 24 Nov 2010 06:50:18 +0000

Modern style. Longer handle. Available in white ABS plastic. Each hand bidet kit includes a hand bidet holder,chrome metal spiral hose, inline control valve, ceramic core on/off valve, and metal t-fitting with back flow preventer.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose

Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.

Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve

Brass/Chrome Ceramic Core on/off valve

Hand Bidet Holder / Mounting Bracket

Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.

and FREE Inline Ceramic Core control valve valued at $19.95!

Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

FREE Travel Bidet Included – $59.95 value!

NOTE: LIMIT 1 TRAVEL BIDET PER ORDER.

Each standard (cold water) hand bidet kit is supplied with the following:

High Pressure Chrome Metal Spiral Hose
Sanicare hoses are specifically designed for use with our hand bidets. Their flexible, approximately 40″ in length is designed to withstand more than 4 times your normal household water pressure.
Metal T Adapter valve with Built-in Filter and Backflow Prevention Valve
This fitting is designed for US toilets and has an exclusive screen filter not found on other cheap hand bidets. It’s easily removed for cleaning and helps to prevent your spray head nozzle from clogging up and leaking when in the off position. Also included is a backflow prevention valve to eliminate contamination of your water supply.
Brass/Chrome Ceramic Core on/off valve
The very best valves incorporate ceramic core seals for the best seal and long life. It’s important that you have a separate valve on your hand bidet SEPARATE from the fresh water source to the toilet. This is a MUST safety feature. Only quality Sanicare hand bidets offer this feature.
Hand Bidet Holder / Mounting Bracket
Depending on your model, each hand bidet is supplied with a special holder / mounting bracket allowing you to attach the hand bidet to a convenient location within easy reach.
and FREE Inline Ceramic Core control valve valued at $19.95!
Quality inline ceramic core seals for the best seal and long life. Installs between the hose and hand bidet for complete easy to regulate flow of water.

Sanicare Hand Bidets Are Easy to Install:

You can Do It Yourself with just a few common tools:

	The Sanicare Hand Bidet you have ordered can be installed in a variety of convenient locations; either on the left or right side of your toilet. The only limitation is the length of the flexible hose. Although we have provided the most common plumbing fittings, should this unit not fit your toilet’s plumbing we suggest that you take your bidet to your local hardware store to find the correctly sized fitting/adapter.
Installation:
	1. Turn off the water valve at the base of the wall behind (near) the toilet as shown in Fig. 1-A 2. Flush your toilet to drain all of the water from the toilet tank. A small amount of water may remain in the tank, so you will want a small bowl and/or towel to catch it when you remove the hose in the next step. 3. Disconnect the hose at the underside of the tank as shown in Fig. 1-B
	4. Install The T-Connector fitting as shown in Fig.2 Connecting the T-fitting to the toilet and then the water supply hose to the bottom of the T-fitting. Use a piece of cloth or thin cardboard to protect the polished fitting from being scratched by the wrench.
	5. Attach the Ceramic Shut-Off/Flow Control Valve to the outlet branch of the T Connector as shown in Fig.3 Be sure that the rubber gasket (washer) is in place between the fittings. Tighten Well.
	6. Connect the flexible spiral metal bidet hose to the to the valve by placing the rubber gasket between the hose nut and the valve fitting. Tighten well. (See Fig. 4) 7. Direct the free end of the flexible hose into the toilet bowl and then open the valves to flush out the bidet hose to remove any residue before connecting to the in-line valve and hand bidet.
	8. (Optional) Attach the In-Line Control Valve to the free end of the bidet hose as shown in Fig.5. Be sure to insert a rubber gasket between the valve and the hose. Tighten well.
	9. Attach the Hand Bidet Spray to the In-line Valve as shown in Fig. 6 (or to the free end of the hose if you did not install the optional In-Line Valve). Be sure to insert a rubber gasket. Some Hand Bidet models may require a second rubber gasket to achieve a tight, leak-free connection. Test The Hand Bidet to ensure that there are no leaks
	10. Attach the Hand Bidet Holder/Wall Bracket to the wall at a convenient and comfortable location using the screws and wall anchors provided as shown in Fig.7. When mounting on a tile wall surface it is highly recommended that you drill the holes for the screws and wall anchors into the grout lines between the tiles to avoid damaging or cracking a tile.
Product Installation and Recommendations: The water pressure should be between 30 – 75 psi. This hand Bidet is a low-pressure device and for safety reasons not designed for connection to high-pressure outlets. Do not use toilet cleaners containing hydrochloric acid (HCL) to clean this bidet To avoid scratching the finish of your new bidet do not use abrasives such as a stiff brush, steel wool, or abrasive cleaners. Use a soft cloth to polish your Renaissance Hand Bidet to keep it looking bright and new. When not in use it is recommended that you turn the Ceramic Control Valve off to avoid any possible leakage. Should you experience any problems with your hand bidet it is recommended that you first disassemble and clean the unit before calling Technical Support at 1-800-878-4791 (option #3). Sanicare is always there to help you! Troubleshooting: Problem Checkpoint Solution -Cannot close water 1 Disassemble and clean -Water leaks around water 1 Disassemble and clean control plate -Water does not flow 1 Use a cleaning pin by piercing through smoothly the hose of the rinsing plate. -No or low water flow 1 Disassemble and clean