| Installation Instructions
|
Don't have
Acrobat Reader?
Click here
to download |
|
| Accessories |
|
|
| Installation |
| By using a wrench or other proper tool, release the nut on both sides of the toilet to remove the toilet seat and lid. |
 |
|
|
|
| 2. Placing the main unit to the toilet |
| 1. Slide the mounting bolts into the grooves at the rear bottom of the unit according to the distance of the toilet mounting holes. |
2. Install the main unit on the toilet by inserting the mounting bolts to the toilet mounting holes. Fit the core packings and plastic washers on to the bolts from below the toilet, then tighten the nuts securely. |
 |
 |
|
|
| 3. Connecting the Branching Valve |
1. Shut off water supply to the water reservoir by closing valve A.
2. Completely empty water reservoir by flushing repeatedly. Place a small pan below shutoff valve ball cock to catch any remaining water in pipes when unfastening the ball cock coupling nut.
3. Remove existing pipe A.
4. Branching valve is standard 1/2" in size. When connecting 3/8", use the conversion nut with packing before connecting the branching valve. And then connect the branching valve and valve-coupling nut with packing. |
|
|
| 4. Attach Connecting Tubing |
| Use the connecting flexible pipe to connect the body joint of the main unit to the branching valve with two packing. Fasten the coupling nuts at the body joint and the branch outlet. |
|
|
